Schlüter Polyethylene decoupling and sealing mat, 1x1m cut (Ditra25-1M)
- Product reference: Ditra25-1M
- EAN: 633710859783
When it comes to a multi-brand pack, it is then the sum of the PPC of its components.
The Schlüter®-Ditra 25 waterproofing mat is a waterproofing system under tiles (WPS). It is also used for decoupling and vapour pressure equalisation.
Made of polyethylene, it decouples the tiled floor from its substrate to prevent the transmission of movements that could cause cracks or the detachment of the covering. It is coated with a non-woven fabric on the underside.
If you order more than one quantity, you will receive a single cut. Example: 5 x 1 m = 1 cut of 5 m
see detailed description- Length (cm):100
- Width (cm):100
Features of the Schlüter Polyethylene decoupling and sealing mat, 1x1m cut (Ditra25-1M) :
- Product type : Waterproofing mat
- Collection: Ditra
- Length : 1m
- Width : 1m
- Material: Polyethylene
- Room/workplace of destination : Wet room
- Area of use : Interior wall / Interior floor
- Function of the product : Treatment of cracks
- Compatible with hot and cold floors: Yes
- Compatible with PCBT floor: Yes
- Type of substrate: Old substrate (renovation) / New substrate
- Type of waterproofing system: SPEC
- Manufactured in the European Union: Yes
.
Product benefits :
- Ensures load distribution and good adhesion of the tile covering to the substrate
- Can be used on floors and walls
- Supports the passage of heavy loads
- Allows the installation of large format tiles - Uniform heat distribution
.
Advice for use :
- Use a 3x3 or 4x4 notched spatula
- Take care when laying the mat to ensure that air is expelled and the mat is anchored
- Fill the cavities well with adhesive mortar
- When laying over old tiles, any loose tiles must be removed
- Removal of the floor is required if more than 10% of the room is loose
- For outdoor use: tiles must be laid with C2 thin-bed mortar with double bonding (full-bath installation) and with a joint spacing of at least 10 mm (Schlüter®-DILEX-EKSN) every 4 m
When it comes to a multi-brand pack, it is then the sum of the PPC of its components.
(26.35% saving)